How to Turn Off Water Filter Light on Whirlpool Refrigerator

Table of Contents

How do you turn off the water filter light on your Whirlpool refrigerator? Find the water filter switch, press and hold it for about three seconds. Reset the water filter indicator and check if the lights are off. If the light is still on, then you will need to call a professional technician because the water filter in your refrigerator may be faulty. 

This article will cover the steps you can use to turn off the water filter light on your Whirlpool refrigerator. Additionally, we will discuss the reasons why your Whirlpool refrigerator water filter may stay on. 

Why Whirlpool refrigerator water filter may stay on

sf-water-filter-indicator-2

There are a few possible reasons why Whirlpool refrigerator water filter may stay ons:

1. The filter may not have been properly installed. The light may stay on if the filter is not seated correctly in the refrigerator’s water filter housing. Always ensure the filter is fully inserted and the seal is tight.

2. The filter may not be compatible with your refrigerator. Using the right water filter for your Whirlpool refrigerator model is essential, as other filters may not be compatible with your refrigerator’s system. Make sure you’re using the correct filter for your model. 

3. The filter may not have been reset after replacement. Some Whirlpool refrigerators have a reset button that needs to be pressed after the filter is replaced. This is usually located behind the kickplate or in the water filter housing.

How to turn off water filter light on Whirlpool refrigerator

Before we get started on the steps to follow, it’s important to note that the process for turning off the water filter light on your Whirlpool refrigerator may vary depending on the model of your refrigerator. Some models may have a button or switch specifically designed for this purpose. Other Whirlpool refrigerators require you to go into the refrigerator’s settings menu to turn off the light. In either case, you should be able to find the instructions in your refrigerator’s owner’s manual. If you don’t have the manual, you can find it online or by contacting Whirlpool’s customer service.

sf-pressing-reset-button

Steps to turning off water filter light on Whirlpool refrigerator

Follow these steps to turn off the water filter light on your Whirlpool refrigerator:

1. Step one is to locate the water filter button or switch. On some models, you will find a water filter button or switch on the control panel or the side of the refrigerator. This button or switch is usually labeled with the words “water filter” or a symbol that looks like a water droplet with an arrow. If you can’t find the button or switch, check your owner’s manual for its location.

2. The second step is to press and hold the water filter reset switch. Depending on your model, you may need to press and hold the button for a few seconds. These are those Whirlpool refrigerator models that will need you to press the button once.

3. The third step is to reset the water filter indicator. After pressing the water filter button or switch, you may need to reset the water filter indicator by pressing a separate button or by going into the refrigerator’s settings menu. Again, the exact process may vary depending on your model, so consult your owner’s manual for specific instructions.

4. Check that the light has been turned off. Once you have followed the above steps, the water filter light should be turned off. You can verify this by looking at the control panel or running water through the dispenser to see if the light comes on.

5. If the light does not turn off or turns back on after a short period, this may indicate that the water filter is still clogged or needs to be replaced. In this case, you will need to replace the water filter according to the manufacturer’s instructions.

6. There are cases where the water filter light continues to light on or even turns back on. If this happens, you must check the water supply line and ensure it is correctly connected to the Whirlpool refrigerator. Also, check the water valve on the back of the refrigerator to ensure it is open and allows water to flow through.

7. If the water filter light stays on even after following all the steps mentioned earlier, you may need help from a professional appliance repair technician. Additionally, you can get back to the Whirlpool refrigerator manual for insights.

sf-professional-appliance-repair-technician

Using the refrigerators settings menu

Suppose the above general steps don’t work or you can’t find the water filter button or switch on your Whirlpool refrigerator model. You may need to go into the refrigerator’s settings menu to turn off the water filter light. 

Here are the steps to follow.

  1. Press the “Home” or “Settings” button on the control panel. This action will bring up the main menu for the Whirlpool refrigerator’s settings.
  1. Navigate to the “Water Filter” or “Filter Status” menu. Depending on your model, this menu may be located under a different name or location. Again, consult your owner’s manual for instructions on where to find the menu.
  1. Select the “Reset Filter” or “Turn Off Filter Light” option. Once you have found the right menu, you should see an option to reset the water filter or turn off the filter light. Select this option using the control panel buttons or the touchscreen.
  1. Check that the light has been turned off. After following these steps, the water filter light should be turned off. You can verify this by looking at the control panel or running water through the dispenser.

If you’re still having trouble turning off the water filter light on your Whirlpool refrigerator, there may be a problem with your Whirlpool refrigerator.

Conclusion

Turning off the water filter light of your Whirlpool refrigerator is a simple process. Ensure the filter is installed correctly, use a genuine Whirlpool filter, press the reset button if necessary, and check for any error codes. If you’re still having trouble, don’t hesitate to contact Whirlpool for assistance. By following these steps, you can ensure that your refrigerator’s water is pure and clean, and you can enjoy refreshing drinks and meals every day.

See Filter is an excellent platform to consider when you need to purchase quality Whirlpool refrigerator water filters. Our water filters are affordable and the quality is guaranteed. 

About the Author

Sharing is Caring!

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart